WARMAN PUMP

A new impeller
Liners are original Warman parts as new second hand.

Centrifugally sealed with a new shaft sleeve, packings, lantern ring and neck ring.

New Timken bearings with new seals throughout.

Shot blasted and painted blue.

Inspected and rebuilt by experts.

TYPE - 10/8EM-A05

WARMAN 10/8EM RU

Liners and impeller are all new R55 type rubber.

Centrifugally sealed with a new shaft sleeve, packings, lantern ring and neck ring.

New Timken bearings with new seals throughout.

Shot blasted and painted blue.

Inspected and rebuilt by an expert

£6500.00 +VAT

TYPE - 10/8EM RU

10/8 EM RUBBER LINED WARMAN PUMP

This pump has been completely dismantled shot blasted and then inspected before each component has been reassembly into this pump.

The bearing assembly has had new Timken bearings fitted along with new piston rings, shim set, bearing seals, set screws and grease nipples.

Care is always taken when we assemble all of our bearing assemblies. The best quality EP2 grease is applied by hand directly onto the bearings making sure that the grease has been applied to the correct places and in the correct quantity. The correct bearing endfloat is always applied and whiteness checked by a second engineer.

All new rubber liners have been fitted along with a new impeller. A new chrome alloy expeller ring and expeller supports a new neck ring, lantern ring and packings as well as a new shaft sleeve and gland.

The frameplate liner coverplate liner and throat bush are new as well as a new impeller.


The pump has been finished off with new clamp bolts and a new adjusting screw along with set screws and new seals throughout.

Al l of our pumps are built in England by Warman pump specialists with Warman pump expertise of more than 45 years.

WARMAN PUMP

200PF PC WARMAN PUMP

Liners and impeller better than 95% as new, original Warman A05 chrome alloy.
Warman A05 is the very best chrome alloy available and far superior to the copy cat materials that have flooded the market place in recent years.
Centrifugally sealed with a new shaft sleeve, packings, lantern ring and neck ring.
New Timken bearings at the drive end and SKF at the Wetted end with new seals throughout.
Shot blasted and painted Caterpillar Yellow.
Inspected and rebuilt by an expert.

TYPE - 200PF PC

WARMAN PUMP

The impeller an original Warman part and is almost as new condition.

Liners are original
Warman parts very good second hand.

Centrifugally sealed with a new shaft sleeve, packings, lantern ring and neck ring.

New NTN bearings with new seals throughout.

Shot blasted and painted blue.

Inspected and rebuilt by experts.

TYPE -10/8 FAH-A05

6/4 DAH METAL LINED WARMAN PUMP

Two fully refurbished Warman 6/4 DAH Warman pumps for sale.

This 6/4 DAH is fitted with A05 chrome alloy liners and impeller. The shaft seal assembly is a centrifugal seal arrangement which consists of an expeller ring and an expeller which is generally considered to be the standard set up.

The pump has been completely dismantled shot blasted and then inspected before each component has been reassembly into this pump.

The bearing assembly has had new Timken bearings fitted along with new piston rings, shim set, bearing seals, set screws and grease nipples. The best quality EP2 grease has been applied by hand directly onto the bearings making sure that the grease has been applied to the correct places and in the correct quantity.

The back liner, impeller, volute liner and throat bush are all in very good condition with the wear being less than 10%.


The pump has been finished off with new bolts and screws throughout along with new seals throughout.

WARMAN 6/6 EG GRAVEL PUMP

This pump has been completely dismantled shot blasted and then inspected before each component has been reassembly into this pump.

The bearing assembly has had new Timken bearings fitted along with new piston rings, shim set, bearing seals, set screws and grease nipples. The best quality EP2 grease has been applied by hand directly onto the bearings making sure that the grease has been applied to the correct places and in the correct quantity.

A new chrome alloy stuffing box has been fitted along with a lantern restrictor and four new packings. The shaft sleeve and shaft spacer are also new.

The back liner, impeller, door and bowl are all new.


The pump has been finished off with new bolts and screws throughout along with new seals throughout.

Al l of our pumps are built in England by Warman pump specialists with pump Warman pump expertise of more than 45 years.

WARMAN PUMP

METAL LINED WARMAN PUMP

Fully Refurbished. Liners and impeller are 95% as new Original Warman A05 chrome alloy.
Warman A05 is the very best chrome alloy available and far superior to the copy cat materials that have flooded the market place.
Fitted with the very latest WRT Impeller and Throat bush. (WRT = Wear Resistant Technology)
Centrifugally sealed with the latest HiSeal centrifugal expeller and expeller ring.
New bearings and seals throughout.
Shot blasted and painted Caterpillar Yellow.
Inspected and rebuilt by an expert.

TYPE - 6/4EAH

WARMAN 8/6EAH

Liners and impeller are all new R55 type rubber.

Centrifugally sealed with a new shaft sleeve, packings, lantern ring and neck ring.

New Timken bearings with new seals throughout.

Shot blasted and painted blue.

Inspected and rebuilt by an expert.

TYPE - 8/6EAH

12/10FM WARMAN PUMP

Fully refurbish metal lined pump for sale.

This 12/10 FM A05 chrome alloy lined pump has been completely dismantled shot blasted and then inspected before each component has been reassembly into this pump.

The bearing assembly has had new bearings fitted along with new piston rings, shim set, set screws and grease nipples. The best quality EP2 grease has been applied by hand directly onto the bearings making sure that the grease has been applied to the correct places and in the correct quantity.

A new Warman expeller ring and expeller has been fitted along with a lantern ring, neck ring and two new packing’s. The shaft sleeve is also new.

The back liner, throat bush and volute liner are all new original Warman parts.

The pump has been finished off with screws and new seals throughout.


This is an outstanding 12/10 FM refurbishment of an original Warman pump.

WARMAN 14/14 FD DREDGE PUMP

Fully refurbish Warman Dredge pump for sale.

This 14 / 14 FD has been completely dismantled shot blasted and then inspected before each component has been reassembly into this pump.

The bearing assembly has had new bearings fitted along with new piston rings, shim set, set screws and grease nipples. The best quality EP2 grease has been applied by hand directly onto the bearings making sure that the grease has been applied to the correct places and in the correct quantity.

A new Warman stuffing box has been fitted along with a lantern restrictor and four new packings. The shaft sleeve and shaft spacer are also new.

The back liner, impeller, door and bowl are all showing very little or no wear at all.


The pump has been finished off with new bolts and screws throughout along with new seals throughout.

WARMAN PUMP

METAL LINED, EXPELLER RING SEAL

Fully refurbed, New liners, seals and bearing etc

TYPE - 8/6EAH A05